Voltage Regulator Adjustable, metal housing

Voltage Regulator Adjustable, metal housing
For a larger view click on the thumbnail
35,00 EUR
19 % VAT incl. excl. Shipping costs
Add to cart

Product no.: 121843



  • Details
  • More images
  • Recommendation
  • Customer-tip

Products description

Electronic replacement voltage regulator with metal housing.
Bolt-on replacement. ADJUSTABLE voltage setting allows charging system to be maximized for city use / low speed slow engine revs.

Rated at 14.3 volts; can be adjusted to a higher voltage, simply turn the small screw on the regulator clockwise to get a HIGHER voltage, turn counterclockwise to decrease. Can also be set lower, but should not drop below 13.7 volts as this may not be enough to overcome the internal resistance of the battery.

Technical information: Preset to 14.3 volt trim setting; Adjustable voltage setting allows optimization of proper voltage for lower speed city driving. Must be used with caution as overcharging with a higher voltage setting can and will damage the battery.

Testing the voltage regulator: Jumpering the D+ and DF connections on the regulator plug should give a voltage reading of approximately 16 volts on the battery with the engine running and the rotor, stator and diode board/rectifier functioning correctly.

For conventional or AGM batteries, it is recommended that the voltage does not exceed (14.5 V) and does not fall below 13.7 V.
For lithium batteries, please contact the battery manufacturer. Most manufacturers recommend a maximum of 14.1 V.


compare 12321244409












Product safety information
Responsible person EU:

Motoren Israel GmbH

Hauptstr. 54

DE-56335 Neuhäusel

info@motoren-israel.de

026208800


Manufacturer:

Euro Motoelectrics

2505 W 2nd Ave #15

US-80219 Denver, CO

info@euromotoelectrics.com

303-526-0901










Voltage Regulator Adjustable, metal housing
Voltage Regulator Adjustable, metal housing

Recommended products:

Diode board
95,00 EUR
19 % VAT incl. excl. Shipping costs
Rotor
90,00 EUR
19 % VAT incl. excl. Shipping costs

This product is compatible with:

Rotor
90,00 EUR
19 % VAT incl. excl. Shipping costs
Bypass wire

Error message 403 Forbidden. Bitte DeepL API Key und API Einstellungen prüfen. Bitte Länderkürzel prüfen. z.B. EL = Griechisch.

20,00 EUR
19 % VAT incl. excl. Shipping costs

Customers who bought this product also bought the following products:

Alternator carbon-set with ring connection 2pc

Alternator carbon-set with ring connection.

No soldering required.

8,00 EUR
4,00 EUR per Stück
19 % VAT incl. excl. Shipping costs
Compression spring set for carbon brush generator
5,50 EUR
2,75 EUR per Stück
19 % VAT incl. excl. Shipping costs
Modified diode board
99,00 EUR
19 % VAT incl. excl. Shipping costs
Camshaft gasket set
10,00 EUR
19 % VAT incl. excl. Shipping costs
Solid Mount for Diodeboard 4pc.
19,10 EUR
4,78 EUR per Stück
19 % VAT incl. excl. Shipping costs
Battery mount rubber bobbin

Fits R45, 65, 60/6, 75/6, 90/6, 90S, 60/7, 75/7, 80RT, 80, 100S, 100RS, 100RT, 65LS, 80ST, 65GS Paralever R80GS, 100GS, 80GS-PD, 100GS-PD, 80R, 80R Mystik, 100R, 100R Mystik, 80GS Basic

9,00 EUR
19 % VAT incl. excl. Shipping costs