- Details
- Recommendation
- Customer-tip
Products description
The set allows you to “step on the gas” without reaching for it!
These levers are exchanged for the original levers. The carburetor does not need to be removed for this.
It is possible to revert to the normal levers at any time without any problems.
Shorter levers on the throttle shaft shorten the throttle travel and increase the pulling force on the throttle grip.
To reduce this pull weight, other springs can be installed, see item number 131066.
The pull weight is then only 1.0 kg instead of 1.4 kg.
Installation: The bent lever on the inside, then the washer and the flat lever on the outside.
Resynchronization is recommended.
Recommended products:
This product is compatible with:
Customers who bought this product also bought the following products:
2 pieces
Stainless steel hose clamp L = 47-54mm for boot / 5/6 & G/S-models and 32er carburetor
The pressure plate is fixed with 6 screws.
Gearbox »
More information on your personal page »
