- Details
- More images
- Recommendation
Products description
Nikasil cylinders have a tighter running clearance.
The cylinders are measured for dimensional accuracy and roundness. If these are within the factory tolerance, the corresponding piston is assigned and the piston ring clearance is adjusted.
The cylinders are blasted and new stainless steel push rod protection tubes are installed. The price is for 2 cylinders.
Please send us your cylinders well packaged. Don't forget to include your address, telephone number, and email address!
Recommended products:
High quality piston for R100 with Nikasil cylinders C from 1981 on, produced with recent technical expertise.
MADE IN GERMANY!!
High quality piston for R100 with Nikasil cylinders B from 1981 on, produced with recent technical expertise.
MADE IN GERMANY!!
For all R80 Nikasil cylinders A = 84,76 mm from 1981 on.
For all R80 Nikasil cylinders C = 84,78mm from 1981 on.
For all R 80 Nikasil cylinders B = 84,77 mm from 1981 on.
High quality piston for R100 with Nikasil cylinders A from 1981 on, produced with recent technical expertise.
MADE IN GERMANY!!
For 1000cc Nikasil cylinders C from 1981 on, piston size C=93,98 mm.
Cylinder, push rods and cylinder studs need to be shortened for this kit!
For 1000cc Nikasil cylinders B from 1981 on, piston size B 93,97 mm.
Cylinder, push rods and cylinder studs need to be shortened for this kit!
For 1000cc Nikasil cylinders A from 1981 on, piston size 93.96 mm.
Cylinder, push rods and cylinder studs need to be shortened for this kit!
(in conjunction with cylinder overhaul art.-no. 112100 and 112030 or cylinder kits)
This product is compatible with:
(in conjunction with cylinder overhaul art.-no. 112100 and 112030 or cylinder kits)
The Nikasil cylinders must be honed (Number: 9305)
For all R 80 Nikasil cylinders B = 84,77 mm from 1981 on.
For all R80 Nikasil cylinders C = 84,78mm from 1981 on.
